{"product_id":"1u-blanking-panel-5-pack-for-10-inch-racks","title":"1U Blanking Panel, 5 Pack, for 10 Inch Racks","description":"\u003cp\u003eFive 1U blanking panels printed in one batch, so the black matches and the edges line up all the way down the front of your 10 inch rack. It's the same 4mm panel we sell on its own, five of them, 3D printed in black PETG here in Tewkesbury.\u003c\/p\u003e\n\u003ch3\u003eWhy five from one batch match\u003c\/h3\u003e\n\u003cp\u003eFilament varies. Not wildly, but enough that a black made in March and a black made in September can sit next to each other in a rack and quietly not match. Printers drift too, and a machine gets tuned between one job and the next. These five come off one batch, one spool and one set of settings, so stacked down the front they read as one surface.\u003c\/p\u003e\n\u003cp\u003eIt's also how racks fill up. Almost nobody has exactly one gap. There's the one above the switch, the one where the second Pi is going to live one day, and the two at the bottom you've stopped seeing.\u003c\/p\u003e\n\u003cp\u003eThe five pack costs less than four single panels, so if you've got four gaps it's the cheapest way to fill them, and you keep a spare. If you've only got three, the Homelab Starter Kit is three of the same panel printed together.\u003c\/p\u003e\n\u003ch3\u003eWill it fit your rack?\u003c\/h3\u003e\n\u003cp\u003eEvery panel in this box is the same as the single in every dimension, so if the single fits your rack, so does every one of these. The number that decides it is the spacing between your left and right mounting holes, 236.525mm centre to centre. There's no official standard for the outside width of a 10 inch rack, so measure yours and you'll know.\u003c\/p\u003e\n\u003cp\u003eOn 9 August 2026 this panel went into two very different racks in one morning: our own Four Layers Cube, which has square cage nut slots, and a Lab Rax style rack, where the holes are threaded metal inserts that can't shift to help you. It went into both, unmodified.\u003c\/p\u003e\n\u003cp\u003eOur holes are round rather than slotted, so there's about 0.3mm of float in each and no adjustment beyond that. Five panels that don't fit is worse than one, so if you're not certain, check your rack with our fit guide or send us a photo of your rails first.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp\u003eFive panels. Screws, cage nuts and washers aren't included, because 10 inch racks don't agree on fasteners. M6 cage nuts, M3 with butterfly nuts, tapped rails and old imperial threads all turn up. Twenty of the wrong screws is twenty bits of landfill, and your rack came with the ones it wants.\u003c\/p\u003e\n\u003cp\u003eBefore you order twenty of anything, this is a 4mm plate, so on a rack with threaded inserts each screw loses 4mm before it reaches the rail. Add 4mm to the length you'd use on a thin steel panel.\u003c\/p\u003e\n\u003ch3\u003eWhy black PETG\u003c\/h3\u003e\n\u003cp\u003eSame reason as everything else we make. A rack gets warm and stays warm, and PLA goes soft at temperatures a rack really reaches. A panel also gets undone and done up again more often than you'd think, and PETG takes that in its stride.\u003c\/p\u003e\n\u003ch3\u003eEvery measurement, published\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eQuantity: five identical panels\u003c\/li\u003e\n\u003cli\u003eRack format: 10 inch\u003c\/li\u003e\n\u003cli\u003eOverall size, each: 249.0mm wide, 43.65mm tall, 4.0mm thick\u003c\/li\u003e\n\u003cli\u003eRack unit: 1U each, so 43.65mm of panel inside a 44.45mm unit\u003c\/li\u003e\n\u003cli\u003eHorizontal mounting hole centres: 236.525mm, M6\u003c\/li\u003e\n\u003cli\u003eVertical mounting hole centres: 31.75mm\u003c\/li\u003e\n\u003cli\u003eWhich holes it uses: the 1st and 3rd hole of the U, middle hole left free\u003c\/li\u003e\n\u003cli\u003eFixings: four M6 per panel, twenty across the pack\u003c\/li\u003e\n\u003cli\u003eHole type: round, not slotted\u003c\/li\u003e\n\u003cli\u003eCorner radius: 6.0mm\u003c\/li\u003e\n\u003cli\u003eMaterial: black PETG, one spool for the whole batch\u003c\/li\u003e\n\u003cli\u003eMade: in small batches by the two of us in Tewkesbury, Gloucestershire\u003c\/li\u003e\n\u003cli\u003eModel code: FL-BLANK-1U-5PK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree UK postage, out in a day or two, and 30 days to change your mind on top of your 14 day right to cancel.\u003c\/p\u003e","brand":"Four Layers","offers":[{"title":"Default Title","offer_id":58469859721547,"sku":"FL-BLANK-1U-5PK","price":28.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/2404\/6667\/files\/four-layers-1u-blanking-panel-5-pack.png?v=1789398290","url":"https:\/\/four-layers.com\/products\/1u-blanking-panel-5-pack-for-10-inch-racks","provider":"Four Layers","version":"1.0","type":"link"}