<?xml version="1.0" encoding="UTF-8"?>
<urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9" xmlns:image="http://www.google.com/schemas/sitemap-image/1.1">
  <url>
    <loc>https://four-layers.com/blogs/guides/10-inch-rack-dimensions-every-measurement-that-matters</loc>
    <lastmod>2026-11-14T09:08:59+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/1077/2404/6667/articles/fl-2026-10-15-cube-page-front-with-panel.jpg?v=1792078313</image:loc>
      <image:title>10 inch rack dimensions: every measurement that matters</image:title>
      <image:caption>The front of the Four Layers Cube seen straight on, with a 1U panel screwed across the two rails, the two carry handles on top and the bottom deck below</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://four-layers.com/blogs/guides/10-inch-rack-vs-19-inch-rack-which-one-should-you-buy</loc>
    <lastmod>2026-10-15T21:40:07+01:00</lastmod>
    <changefreq>weekly</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/1077/2404/6667/articles/fl-2026-10-15-cube-page-header-three-quarter.jpg?v=1792078356</image:loc>
      <image:title>10 inch rack vs 19 inch rack: which one should you buy</image:title>
      <image:caption>The Four Layers Cube from a front corner: a black 5U 10 inch rack with two carry handles on top, the open front with its two rails of square holes, and a side panel with an oval hand hole and slanted vent slots</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://four-layers.com/blogs/guides/does-a-10-inch-blanking-panel-actually-do-anything</loc>
    <lastmod>2026-11-18T10:36:33+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/1077/2404/6667/articles/fl-2026-10-15-1u-blanking-panel-straight-on-white.jpg?v=1792078390</image:loc>
      <image:title>Does a 10 inch blanking panel actually do anything?</image:title>
      <image:caption>A black 1U blanking panel on its own, seen straight on, showing all four mounting holes</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://four-layers.com/blogs/guides/will-it-fit-a-10-inch-rack-compatibility-checklist</loc>
    <lastmod>2026-11-18T10:36:34+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/1077/2404/6667/articles/fl-2026-10-15-cube-page-from-above-empty.jpg?v=1792078404</image:loc>
      <image:title>Will it fit? A 10 inch rack compatibility checklist</image:title>
      <image:caption>The Four Layers Cube from the front and above with nothing fitted: two carry handles and a round hole in each corner of the top, and the open front with its rails and the bottom deck below</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://four-layers.com/blogs/guides/petg-or-pla-for-rack-panels-and-why-we-only-use-petg</loc>
    <lastmod>2026-11-18T10:36:35+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/1077/2404/6667/articles/fl-2026-10-15-1u-blanking-panel-three-quarter-white.jpg?v=1792078417</image:loc>
      <image:title>PETG or PLA for rack panels, and why we only use PETG</image:title>
      <image:caption>The 1U blanking panel at an angle, showing the textured finish of the black PETG along its length</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://four-layers.com/blogs/guides/which-screws-does-your-10-inch-rack-take-m3-m6-and-cage-nuts-explained</loc>
    <lastmod>2026-11-19T15:13:31+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/1077/2404/6667/articles/fl-2026-10-15-cube-rails-close-up-panel-and-screws.jpg?v=1792078429</image:loc>
      <image:title>Which screws does your 10 inch rack take? M3, M6 and cage nuts explained</image:title>
      <image:caption>Close up of the Four Layers Cube&apos;s front rails: rows of square cage nut holes, with a black 1U panel held on by cross-head screws</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://four-layers.com/blogs/guides/how-to-rack-mount-a-raspberry-pi-in-a-10-inch-rack</loc>
    <lastmod>2026-10-15T21:38:51+01:00</lastmod>
    <changefreq>weekly</changefreq>
  </url>
  <url>
    <loc>https://four-layers.com/blogs/guides/free-file-or-a-finished-panel</loc>
    <lastmod>2026-11-18T10:36:38+00:00</lastmod>
    <changefreq>weekly</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/1077/2404/6667/articles/fl-2026-10-15-1u-blanking-panel-end-close-up-white.jpg?v=1792078485</image:loc>
      <image:title>Free file or a finished panel</image:title>
      <image:caption>Close up of one end of the 1U blanking panel, showing two mounting holes and the textured black PETG surface</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://four-layers.com/blogs/the-bench/this-is-the-bench</loc>
    <lastmod>2026-10-15T16:34:58+01:00</lastmod>
    <changefreq>weekly</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/1077/2404/6667/articles/fl-2026-10-15-printer-camera-h2s-printing-cube-side-panel.jpg?v=1792078498</image:loc>
      <image:title>This is The Bench</image:title>
      <image:caption>Inside one of our printers part way through a job, printing a black side panel for the Four Layers Cube</image:caption>
    </image:image>
  </url>
</urlset>
