Cube build guide

This guide is for the Cube v4.0. Everything you need to build it is in the box, key included, and the brass inserts are already fitted, so there's no soldering iron or glue anywhere in this.

The one thing worth knowing before you start: you build the top half upside down, turn it over once, and finish it right way up. Done in that order, every screw goes in downwards, so you never have to hold one up into a hole from underneath.

Download the Cube build guide (PDF, 12 pages)

If something won't go together, or something's missing from the box, tell us and we'll help you sort it. Email hello@four-layers.com, or use the message form on the Contact page. If a photo would help, send it by email, because the form can't carry a picture.