Everything we worked out the hard way

Ten inch racks have no proper standard, no agreed hole spacing published by anyone selling into them, and a lot of confident wrong answers. We write down what we measure, so you do not have to buy the wrong thing to find it out.

We are not writing these to rank for something. We are writing them because every single one of them started as an email from somebody trying to work out whether a part would fit, and it is faster to answer it once, properly, in public.

Start here if you are new to 10 inch racks

How to rack mount a Raspberry Pi in a 10 inch rack
Four ways to put a Raspberry Pi in a 10 inch rack, and what each one costs you in rack space. The bit nobody warns you about is the gap either side of it. Read more... How to rack mount a Raspberry Pi in a 10 inch rack
Which screws does your 10 inch rack take? M3, M6 and cage nuts explained
Nobody ships screws with a 10 inch rack panel, us included, and there's a good reason. The three kinds of hole you'll meet, the threads that go in them, and... Read more... Which screws does your 10 inch rack take? M3, M6 and cage nuts explained
PETG or PLA for rack panels, and why we only use PETG
If you print, you've had this argument already. Here's how a rack panel actually fails, slowly and in what order, and why we use PETG without quoting you a pair... Read more... PETG or PLA for rack panels, and why we only use PETG
Will it fit? A 10 inch rack compatibility checklist
Two racks can both be sold as 10 inch and still take different parts. This is the check that tells you which sort you've got, with a tape measure, in... Read more... Will it fit? A 10 inch rack compatibility checklist
Does a 10 inch blanking panel actually do anything?
Somebody asked us this outright, and it's a fair question. Here's what a blank does in a small home rack, and why we won't quote you an airflow figure we... Read more... Does a 10 inch blanking panel actually do anything?
10 inch rack vs 19 inch rack: which one should you buy
We make parts for 10 inch racks, and plenty of people should still buy a 19 inch one. Here's how to work out which suits you, from noise and depth... Read more... 10 inch rack vs 19 inch rack: which one should you buy
10 inch rack dimensions: every measurement that matters
There's no official standard for a 10 inch rack, only habits most makers share. Here's every measurement in one place, and the one number that decides whether a part will... Read more... 10 inch rack dimensions: every measurement that matters
Free file or a finished panel
The free 10 inch rack files on Printables, MakerWorld and Thingiverse are good, and we're happy to say so. Here's what printing your own really costs, and when a finished... Read more... Free file or a finished panel

The short version

236.525 mm between the mounting hole centres, 44.45 mm per U, 43.65 mm of panel. If your rack matches that, our panels fit it.

Check it fits your rack

Still not sure

Send us a photograph of your rails and a tape measure reading across them, and we will tell you in a sentence, including when the answer is that ours will not fit.

Ask us about your rack See the panel