You could print one yourself. Here's the comparison

Free 10 inch rack designs are everywhere and some of them are excellent. We're not going to pretend otherwise, so here's the straight version of when to print your own and when to buy ours.

The free files are good, and they're why this hobby exists

Cube Rack. Lab Rax. Mod10. A parametric generator on MakerWorld that'll spit out a rack to whatever spacing you tell it. Printables, Thingiverse and MakerWorld are full of 10 inch rack parts, given away by people who spent their evenings drawing them and asked for nothing back.

Half this hobby exists because of them, ours included. If you've got a printer and you enjoy the process, go and use them, and don't let a shop tell you otherwise.

Print it yourself if any of this is true

  • You've got a printer and it's dialled in.
  • You've got PETG on the shelf, or you don't mind buying a spool for one part.
  • You enjoy the making as much as the having. That's a real reason and it's a good one.
  • You need something bespoke. A cutout for one particular connector, an odd width, a rack you built yourself to your own spacing. A shop can't help you there and a parametric file can.
  • You need it tonight and you can print faster than the post.

Buy it from us if any of this is true

  • You don't own a printer. Plenty of people with racks don't, and the free file argument quietly assumes you do.
  • You do own one, and your Saturday is worth more than a first layer and a warped second attempt.
  • You want more than one and you want them to match. Panels printed months apart off different spools don't match as well as panels printed in the same batch.
  • You want the surface finish. Getting a clean, repeatable matte face on PETG is a practice problem rather than a settings problem, and it took us a while.
  • You want a set. Everything we make is built to the same hole spacing, the same black, the same corners, so the sixth part sits next to the first.
  • You want somebody to email when it's wrong. That's two named people, rather than a comments thread under a file from 2023.

What printing your own actually costs

The panel we sell is about 53 minutes on the machine and about 32g of filament. That's genuinely not much, and if you've already got the printer running it's close to nothing.

The cost is everywhere else. A spool of PETG you buy for one part. An evening finding out the free file was drawn for a different rack. A first layer that lifts at the corner because PETG is fussier than PLA. The second attempt. And the thing nobody warns you about, which is that most free files are drawn thin so they print fast, and thin bows between the rails.

Ours is £8.50, posted free. That's the number to put against your spool and your evening.

None of that's a reason not to print. It's the list we'd have wanted before we started.

Inside one of our printers part way through a job, printing a black side panel for the Four Layers Cube

What the money pays for

Every measurement on our product pages is there because somebody had to choose it and then find out whether the choice was right. How thick. Round holes or slots. What the corners do. Whether the front edge catches the light or shows you a print line. PETG or PLA.

Then somebody had to bolt it into two very different racks on 9 August 2026 to find out whether the drawing was telling the truth. It was.

That's what the money's for. The decisions, and the evidence they were the right ones.

See the two rack test

The waste question

Some people won't buy a printed part on waste grounds, and that's a fair position rather than a daft one. It's plastic, and we're not going to tell you otherwise.

What we can say is that nothing here is injection moulded ten thousand at a time and warehoused in hope. We print in small batches, so we're not making things nobody wants. It comes from one bench in Tewkesbury to your door rather than off a container ship. And a PETG panel is built to outlast the rack it goes in.

Most people end up doing both

They print the bespoke thing, the bracket for the one device nobody supports, and they buy the parts that have to match each other and sit at the front where they can see them. That seems about right to us, and it's what we do with our own rack.

Made your mind up?

If you're printing your own, use PETG and go thicker than the file says. If you're buying, the 1U panel is finished and in stock at £8.50, made and posted in a day or two with free UK postage.

See the panel Will it fit my rack?