The black 1U rear support bar from the front, with a drilled ear at each end and two fingers underneath

1U Rear Support Bar for Four Layers 10 Inch Rack Trays

£12.00
Skip to product information
The black 1U rear support bar from the front, with a drilled ear at each end and two fingers underneath

1U Rear Support Bar for Four Layers 10 Inch Rack Trays

£12.00

This bolts across the back rails of your 10 inch rack, and its two fingers reach under the back of one of our trays, so the tray's held at both ends instead of hanging off its front screws.

One comes in the box with every tray we sell. This is the same bar on its own, for when you'd like a spare.

It takes one unit at the back of the rack, in the same rack space as the tray it holds, and fits with four M6 cage nut sets on the back rails. You'll need a rack with back rails at the standard 10 inch spacing. The fingers are shaped for the back of our trays, so we can't promise it'll hold another maker's. Not sure it suits your rack? Message us before you buy. We'd much rather answer a question than take a return.

The details

  • Rack format: 10 inch, with back rails
  • Rack spaces: 1U, at the back
  • Works with: our trays, the same bar that comes in the box with each one
  • Mounting hole centres: 236.525mm left to right, four M6 holes
  • Width: 249mm
  • Material: black PETG
  • In the box: the bar. Screws, cage nuts and washers aren't included, because 10 inch racks don't agree on fasteners.
  • Made: in small batches in Tewkesbury, Gloucestershire
  • Model code: FL-MOUNT-1U-REAR-BAR

Free UK postage, and 30 days to change your mind on top of your 14 day right to cancel.

You may also like