A grey test print of the Cube bottom band straight on, an open frame the size of the Cube with a round foot clip in each corner

Bottom Band for The Four Layers Cube 10 Inch Rack

Black
£22.50
Skip to product information
A grey test print of the Cube bottom band straight on, an open frame the size of the Cube with a round foot clip in each corner

Bottom Band for The Four Layers Cube 10 Inch Rack

£22.50
ColourBlack

This clips round the four feet under a Four Layers Cube and hides them from the side, so the Cube sits on what looks like a plinth instead of on legs. It matches our middle band, so a stack with both reads as one tidy block.

You can have it in black or any of eight other colours, all of them Bambu's own PETG and all the same price, and a colour part is printed to order for you.

It hangs on the feet rather than standing on the floor. Behind each foot, two springy arms press a broad pad against it, and the band sits 5mm clear of the floor. That matters on carpet: the feet sink in a little under the weight and a band wouldn't, so if it stood on the floor it would end up carrying the Cube. This way the feet always do.

To fit it, lay the Cube on its back, push the band over the four feet until it touches the underside, and stand the Cube up.

It's made for our Cube, on the feet it comes with, and won't fit another maker's rack.

The photos show a grey test print.

The details

  • Fits: the bottom of a Four Layers Cube, on the feet it comes with
  • Not for: other 10 inch racks
  • Size: 263.6 x 249.1mm, and 27mm tall
  • Floor: sits 5mm clear of it
  • Holding it in place: two sprung arms at each foot. No screws.
  • Weight: carries none, the Cube's feet do
  • Material: PETG, in black or the colour you choose
  • Printed: in one piece
  • In the box: the band
  • Made: in small batches by the two of us in Tewkesbury, Gloucestershire
  • Model code: FL-CUBE-BAND-BOTTOM

Free UK postage, and 30 days to change your mind on top of your 14 day right to cancel.

You may also like