Free file or a finished panel

Close up of one end of the 1U blanking panel, showing two mounting holes and the textured black PETG surface

There are free 10 inch rack files on Printables, MakerWorld and Thingiverse, and the good ones are properly good. We also sell a panel, which you should know before you read a word of this. What follows is the comparison we'd have wanted in front of us before we started making rack parts ourselves.

These are the ones you'll find, and they deserve the credit

Cube Rack. Lab Rax. Mod10. And a parametric generator on MakerWorld that will hand you a rack built to whatever spacing you type into it.

They were drawn by people who spent their evenings on it and then gave the result away for nothing. Half this hobby exists because of them, ours included. If you've got a printer and you enjoy the process, go and use them, and don't let a shop talk you out of it.

The parametric one deserves a particular mention, because it solves a problem no shop can solve. If you've built a rack to your own spacing, or you're working round a rail that isn't quite what anyone else's is, a file you can retype is the only thing on earth that will fit it. We can't help you there. It can.

The panel is the cheap part

Take our 1U blanking panel as the yardstick, since we know exactly what it takes. About 32g of filament, and about 53 minutes on the machine. If your printer is already warm and you've got the right spool loaded, that is very nearly free, and anyone telling you otherwise is selling something.

The cost is everywhere else.

It's a spool of PETG bought for one part, which then needs somewhere dry to live. It's the evening you spend finding out the file was drawn to a spacing that isn't your rack's. It's the first layer lifting at a corner because PETG is fussier than PLA about exactly that. It's the second attempt. It's the third one, which is fine, and which doesn't quite match the first two under the room light.

Then there's thickness, which is the one that catches people. Most free panels are drawn thin, because thin prints fast and a fast print is what gets a file downloaded. Thin bows between the rails, and thin cracks at the bolt hole. Ours is a 4mm plate and that's most of why.

And it multiplies badly. One panel is an evening. Five panels is a weekend, plus a colour match problem, because panels made months apart off different spools do not match each other and it shows most at the front of the rack, which is the only place anybody looks.

Print your own if any of this sounds like you

  • Your printer is dialled in and you already know what it does with PETG on a big flat part. That last bit matters more than people expect. A wide, thin, flat print is where a machine tells the truth about itself.
  • You've got PETG on the shelf, or you don't mind buying a spool for one panel and finding jobs for the rest of it.
  • You want something nobody sells. A cutout for one particular connector. An odd width. A bracket for a device the world has ignored. A rack you built yourself to your own numbers. This is where free files win outright and it isn't close.
  • You need it tonight and you can print faster than the post can travel.
  • You enjoy the making more than the having. That's a real reason, and it's probably the best one on this list.

Buy ours if any of this sounds like you

  • You don't own a printer. The whole free file argument quietly assumes you do. Plenty of people with racks don't, and never will.
  • You own one and your Saturday is spoken for. The printer isn't the constraint. The evening is.
  • You want several and you want them to match. Ours are made in small batches, so a set of five has been made together rather than months apart.
  • You want the surface finish. Getting a clean, repeatable matte face on PETG turns out to be practice rather than settings, and it took us a while to get there.
  • You want the range to agree with itself. Same spacing, same black, same corner radius, so the sixth part you buy sits next to the first as though they arrived together.
  • You'd rather somebody else had already found out whether the drawing is right.

Not a file. A set of decisions that have already been made

Every measurement on our product pages is there because somebody had to choose it and then find out whether the choice held up. How thick. Round holes or slots. What the corners do. Which of the three hole positions in the U to use and which to leave free. How deep to press the lettering so it reads across a room without catching the light wrong.

Then somebody had to prove the drawing. On 9 August 2026 we took one panel off the printer and put it into two very different racks in one morning. Our own rack fastens with square cage nut slots, and a cage nut can shuffle a fraction inside its square hole to meet a bolt, so that rack forgives you. The second was a Lab Rax style rack with threaded metal inserts pressed into the rail, and an insert cannot move at all. That one forgives you nothing. The same panel, unmodified, went into both.

Here's where ours stops, and it's the place a free file beats us. Our holes are round rather than slotted, which gives you a clean front and no adjustment whatsoever. There's roughly 0.3mm of float per hole. If your rack's spacing is out by more than about 0.6mm across, nothing rescues it, because there's no slot to take up the error. A parametric file has no such problem. You type in your own number and print the thing that fits.

Check your rack against our spacing

It was never really either or

The people we talk to print the bespoke thing, the bracket for the one device nobody supports, the tray with the hole in an odd place. Then they buy the parts that have to match each other and sit at the front where they can see them.

That's what we do with our own rack, and we're the ones with the printers.

The one thing a file can't do

A file will give you the part. It won't look at your rails and tell you your spacing is a millimetre out before you spend the evening finding out yourself. It won't tell you the design you've downloaded was drawn for a different rack. It can't answer you at nine on a Sunday night when the panel is in your hand and it isn't going in.

There are two of us. Our names are on this site, the address is on the contact page, and email lands with one of us rather than a queue. Send a photo of your rack rails and tell us what you're trying to close up, and you'll get a straight answer back, including the times when the answer is that you'd be better off printing your own

See the panel

Ask us about your rack

Check your rack in two minutes

Before you go

Every guide here exists because somebody emailed and asked. If yours is not answered, ask it, and one of the two of us will answer.

Check it fits your rack Tell me when the next product lands