2U open front Mac mini tray from the front, with FOUR LAYERS running up the left side and the round opening in the floor

2U Mac mini Rack Mount Tray for 10 Inch Racks, Open Front (M4, M4 Pro)

£28.50
Skip to product information
2U open front Mac mini tray from the front, with FOUR LAYERS running up the left side and the round opening in the floor

2U Mac mini Rack Mount Tray for 10 Inch Racks, Open Front (M4, M4 Pro)

£28.50

This holds the 2024 Mac mini, the little M4 and M4 Pro, in your 10 inch rack. The front's left open, so the Mac itself stays on show with its status light in view, and there's room to plug straight into both front USB-C ports and the headphone jack without lifting anything out.

It takes two units rather than one, because the new Mac stands a little too tall for a single unit, and it bolts in on the same M6 holes as our panels.

There's a rear support bar in the box that bolts across your rack's back rails, and the back of the tray rests on it, so the Mac's held at both ends. The tray itself only screws in at the front, and slides straight out towards you once those four screws are out.

There's no floor. The Mac sits on four small corner shelves, and because it stands on a round foot with its air vents in a ring around it, the tray leaves a big round opening right underneath. The bracing goes round that circle rather than across it, with a cross at the back and a plate in each corner. On this Mac the power button is underneath, so there's a hole for it and the tray never presses it. Five fins across the back each take a cable tie.

We made it to Apple's published size for the 2024 Mac mini, 127 x 127mm. We don't have an M4 here, so this one hasn't had a real Mac in it yet. If there's anything you'd like to check first, message us before you buy. We'd much rather answer a question than take a return.

The details

  • Rack format: 10 inch
  • Rack spaces: 2U
  • Holds: Mac mini 2024, M4 and M4 Pro
  • Made to: Apple's published size, 127 x 127 x 50mm
  • Fit: not yet tried with a real M4 Mac mini
  • Front: open, with FOUR LAYERS running up the left side
  • Front ports: room for a plug in both USB-C ports and the headphone jack
  • Floor: none, the Mac sits on four corner shelves over a round opening for its foot and air vents
  • Power button: a 14mm hole under it, so the tray never presses it. You can reach it through the hole when the space below the tray is empty.
  • Bracing: a cross at the back and a plate in each corner
  • Cable tidy: five tie fins across the back
  • Plate: 249mm wide, 4mm thick
  • Height: 88mm
  • Overall size: 249mm wide, 219.6mm deep, 88.1mm tall
  • Mounting hole centres: 236.525mm left to right, four M6 holes
  • Material: black PETG
  • In the box: the tray and a rear support bar. Screws, cage nuts and washers aren't included, because 10 inch racks don't agree on fasteners.
  • Made: in small batches by the two of us in Tewkesbury, Gloucestershire
  • Model code: FL-MOUNT-2U-MINI-M4

Each tray goes out with its support bar, so for now it can take a bit longer to reach you than our panels do. If you need it by a certain day, message us before you order and we'll tell you where we are.

Free UK postage, and 30 days to change your mind on top of your 14 day right to cancel.

You may also like