A Mac mini in a 10 inch rack

Apple changed the shape of the Mac mini in 2024, so a rack mount made for one won't suit the other. We make a tray for each. The older, flatter Mac mini goes in the 1U, and the little 2024 one goes in the 2U. Find yours below.

2U open front Mac mini tray from the front, with FOUR LAYERS running up the left side and the round opening in the floor

Which Mac mini have you got?

Each box names the Mac minis its tray is made for. If you can't remember which you've got, the last box shows you how to tell.

Mac mini M1 (2020), M2 or M2 Pro (2023), or Intel (2018)

The 1U tray, £25.00. Our own M1 Mac mini has been in it. The M2, M2 Pro and Intel haven't, so for those it's made to Apple's published size.

See the 1U tray

Mac mini 2024, M4 or M4 Pro

The 2U open front tray, £28.50. It hasn't held a real M4 yet. It's made to Apple's published size.

See the 2U tray

Not sure which you have

The older Mac mini is wide and flat, 197mm square and 36mm tall. The 2024 one is smaller and taller, 127mm square and 50mm tall. Still stuck? Message us and we'll help

Each tray goes out with its support bar, so for now it can take a bit longer to reach you than our panels do.

On sale now

1U Mac mini tray from the front, a black honeycomb face with FOUR LAYERS across the middle and the open floor behind it

On sale now

1U Mac mini Tray. £25.00

This holds a Mac mini in one unit of your 10 inch rack, ports to the back, and the Mac lifts straight out whenever you need it.

1U · black PETG · M1, M2, M2 Pro, Intel 2018

See the 1U tray
2U open front Mac mini tray from the front, with FOUR LAYERS running up the left side and the round opening in the floor

On sale now

2U Mac mini Tray, Open Front. £28.50

This holds the 2024 Mac mini, the little M4 and M4 Pro, in your 10 inch rack. The front's left open, so the Mac itself stays on show with its status light in view.

2U · black PETG · M4, M4 Pro

See the 2U tray
1U Mac mini tray seen from above, with the four corner shelves the Mac sits on and the two bars crossing corner to corner underneath

The 1U tray, for the older Mac mini

This is our 10 inch rack mount for the bigger, flatter Mac mini, the one Apple made before the 2024 redesign. It's for the M1 from 2020, the M2 and M2 Pro from 2023, and the Intel one from 2018. It needs just one unit of your rack, and the Mac goes in with its ports facing the back.

There's no floor to it. The Mac rests on four corner shelves with its underside open to the air, and two bars cross corner to corner underneath to keep the tray stiff.

The front is a black honeycomb with FOUR LAYERS across the middle, and the side wall is vented with the same honeycomb. Four fins across the back take your cable ties, so the leads coming off the Mac stay neat.

We've had our own M1 Mac mini in it. There's a small, even gap either side, and every plug at the back goes in. We haven't had an M2, M2 Pro or Intel Mac mini in it. Apple publishes the same size for all of them, and the tray's made to that.

See the 1U tray

The 2U tray, for the 2024 Mac mini

The 2024 Mac mini, the M4 and M4 Pro, is taller than the older one, so its tray takes two units of rack space. With the front left open, you can plug straight into both front USB-C ports and the headphone jack without lifting anything out. FOUR LAYERS runs up the left side.

Like the 1U, there's no floor. The Mac sits on four corner shelves over a big round opening, which leaves its foot and air vents clear. There's a hole under the power button too, so the tray never presses it, and if the space below the tray is empty you can reach the button through it.

A cross at the back and a plate in each corner keep it rigid, and five fins give your cable ties somewhere to go.

We made it to Apple's published size for the 2024 Mac mini, which is the same for the M4 and the M4 Pro. We don't have an M4 here, so this tray hasn't had a real Mac in it yet. If there's anything you'd like to check first, message us before you buy. We'd much rather answer a question than take a return.

See the 2U tray
2U Mac mini tray seen from above, showing the big round opening for the M4's foot and air vents, and the four corner shelves

What comes in the box

Both trays come packed the same way, with the fixings left out on purpose.

  • In the box: the tray and a rear support bar.
  • Not in the box: screws, cage nuts and washers, because 10 inch racks don't agree on fasteners.
  • The rear bar bolts across your rack's back rails, so the Mac is held at both ends.

If you're buying the Four Layers Cube as well, it comes with screws and eight sets of cage nuts. That's enough for one tray with its rear support bar, or two trays without one. For any other rack, our screws guide will help. Which screws does your rack take?

Will it go in your rack?

Both trays bolt in through four M6 holes, 236.525mm apart centre to centre, left to right. Measure yours from the middle of a hole on one rail to the middle of the hole opposite, and you'll know. The front plate on each is 249mm wide. The 1U plate is 43.65mm tall and the 2U is 88mm. A tray needs room behind the rails as well. The 1U is 230.6mm deep overall and the 2U is 219.6mm, so check your rack has that much space. How to measure your rack

Check your rack before you buy

Planning the rest of the rack

If there's a Raspberry Pi going in alongside the Mac, we've written a guide to mounting a Pi. If you're still choosing a rack, every 10 inch rack measurement is in one place, and the Four Layers Cube is the 5U rack we make.

Pick the tray for your Mac

Both are black PETG, made in small batches by the two of us in Tewkesbury. Each tray's own page has all the photos and the full details.

See the 1U tray See the 2U tray